Major Manufacturing HIT-40AR4 Anleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Durch Schlösser Major Manufacturing HIT-40AR4 herunter. Major Manufacturing HIT-40AR4 10 Seiten. Lip strike template

Seite drucken

For height align-

ment, close the door

until the latch makes

contact with the door

jamb. Use a pencil

and mark the top

and bottom of the

latch.

Use a combination square and transfer the

lines on the front edge of the door to the side.

This will show the location of the latch when

it is in the locked position.

Find the center line of the jamb. This

example shows the center line on an offset

hung door. The center line is 7/8" from the

stop, or one half the thickness of the door.

Use a combination square and draw a

vertical line at this point.

Page 5