- ページ 5

ロックス Major Manufacturing HIT-40AR4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major Manufacturing HIT-40AR4 10 ページ。 Lip strike template

For height align-
ment, close the door
until the latch makes
contact with the door
jamb. Use a pencil
and mark the top
and bottom of the
latch.
Use a combination square and transfer the
lines on the front edge of the door to the side.
This will show the location of the latch when
it is in the locked position.
Find the center line of the jamb. This
example shows the center line on an offset
hung door. The center line is 7/8" from the
stop, or one half the thickness of the door.
Use a combination square and draw a
vertical line at this point.
Page 5
Copyright 2007—Major Manufacturing