Major tech MT730 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte Major tech MT730 herunter. Major tech MT730 16 Seiten. Ac trms clamp meter

4.2. HOLD/Flashlight Button

• To freeze the LCD reading, press the Hold/Flashlight button.

• While data hold is active, the HOLD icon appears on the LCD.

• Press the Hold/Flashlight button again to return to normal

operation.

• Press the Hold/Flashlight button to turn the Flashlight on, Press

again to turn the Flashlight off.

• Press the RANGE key to activate the manual mode and to disable

the Autorange function.

• The symbol "AUTO" disappears from the upper left part of the

display.

• In manual mode, press the RANGE key to change measuring

range: the relevant decimal point will change its position.

• The RANGE key is not active in positions

• In Autorange mode, the instrument selects the most appropriate

ratio for carrying out measurement.

• If a reading is higher than the maximum measurable value, the

indication "'0L'" appears on the display.

• Press and hold the RANGE key for more than 1 second to exit the

manual and restore the Autorange mode.

• In AC voltage test mode, press PEAK/INRUSH key, the peak

maximum and peak minimum values can be measured.

• In current test mode, Press INRUSH key the inrush current values

are measured.

• Press the REL button to view the stored value. "REL" will flash in

the display.

• To exit this mode, press and Hold the REL button until "REL" is no

longer in the display.

• DCA measurements press the REL button to zero the display

• Press and hold the REL/Backlight button to turn the Backlight on,

press and hold again to turn the Backlight off.

, CAP, Hz%, Temp.