Major tech MT730 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Major tech MT730. Major tech MT730 16 страниц. Ac trms clamp meter
Печатать страницу
4.2. HOLD/Flashlight Button
• To freeze the LCD reading, press the Hold/Flashlight button.
• While data hold is active, the HOLD icon appears on the LCD.
• Press the Hold/Flashlight button again to return to normal
operation.
• Press the Hold/Flashlight button to turn the Flashlight on, Press
again to turn the Flashlight off.
4.3. RANGE Button
• Press the RANGE key to activate the manual mode and to disable
the Autorange function.
• The symbol "AUTO" disappears from the upper left part of the
display.
• In manual mode, press the RANGE key to change measuring
range: the relevant decimal point will change its position.
• The RANGE key is not active in positions
• In Autorange mode, the instrument selects the most appropriate
ratio for carrying out measurement.
• If a reading is higher than the maximum measurable value, the
indication "'0L'" appears on the display.
• Press and hold the RANGE key for more than 1 second to exit the
manual and restore the Autorange mode.
4.4. PEAK/INRUSH Button
• In AC voltage test mode, press PEAK/INRUSH key, the peak
maximum and peak minimum values can be measured.
• In current test mode, Press INRUSH key the inrush current values
are measured.
4.5. REL/Backlight Button
• Press the REL button to view the stored value. "REL" will flash in
the display.
• To exit this mode, press and Hold the REL button until "REL" is no
longer in the display.
• DCA measurements press the REL button to zero the display
• Press and hold the REL/Backlight button to turn the Backlight on,
press and hold again to turn the Backlight off.
10
, CAP, Hz%, Temp.