Major tech MT760 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte Major tech MT760 herunter. Major tech MT760 16 Seiten. 100a ac/dc trms mini clamp meter
Auch für Major tech MT760: Handbuch (4 seiten)

Seite drucken

5. Before removing the battery cover, please remove clamp meter

from all energized circuit and disconnect lead wire.

6. Do not use clamp meter in circuit with voltage higher than 600V

working or frequency higher than 400Hz.

7. Measurement category class is CAT II 600V/CAT III 300V, pollution

degree is 2. Do not use it out of scope.

8. Be cautious when in environment with exposed wire. Contact with

wire may result in electric shock.

9. For voltage above 60V DC (direct current), 30V AC (AC effective

value) or 42V AC (peak value), such voltage may cause electric

shock.

10. Probe assemblies used for MAINS measurements CAT II 600V/CAT

III 300V according to IEC 61010-031, If you want to replace the

probe assemblies and they need the same level CAT II 600V/CAT

III 300V or better level. Protection impairment if used in a manner

not specified by the manufacturer.

11. Function switches shall be set at the correct position prior to

measurement. Do no switch ranges while measuring voltage or

current.

4. Electrical symbol

Low battery

ACV/DCV

ACA/DCA

Danger! High voltage

Comply with European Union directives

Application around and removal from UNINSULATED

HAZARDOUS LIVE conductors is permitted

This symbol signify the product comply with both USA and

Canada requirement

Warning

Diode

Double insulation

Buzzing on-off

Earthing