Major tech MT945 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte Major tech MT945 herunter. Major tech MT945 12 Seiten. Hot wire thermo anemometer

Seite drucken

The MT945 Hot Wire Thermo Anemometer is a microprocessor-based

device designed to simultaneously measure low air velocity and air

temperature. It utilizes a combination of a hot wire and a standard

thermistor to provide quick and accurate measurements. The slim

telescopic anemometer probe is well-suited for use in ducts and ventilation

systems. Monitoring air velocity and temperature readings together has

never been more convenient, thanks to the large backlit LCD display.

Additionally, the MT945 can record maximum and minimum readings,

allowing you to recall and hold data. Uploading and storing the measured

values into your computer is effortlessly accomplished through the built-in

USB interface.

Please read the following instructions carefully and always keep this

manual within easy reach.

1. FEATURES

• Thermal anemometer for very low air velocity measurement.

• Slim probe, ideal for grilles & diffusers.

• Combination of hot wire and standard thermistor, deliver rapid and

precise measurements even at low air velocity.

• Records Maximum and Minimum readings with recall.

• Microprocessor circuit assures maximum possible accuracy, provides

special functions and features.

• Large LCD with dual function meter's display, read the air velocity &

temp at the same time.

• Records Maximum and Minimum readings with recall.

• Air flow measurement: m/s, km/h, ft/min, MPH, Knots.

• Build in temperature °C, °F measurement.

• Thermistor sensor for Temp. measurement, fast response time.

• Used the durable, long-lasting components, including a strong, light

weight ABS-plastic housing case.

• Applications: Environmental testing, Air conveyors, Flow hoods, Clean

rooms, Air velocity, Air balancing, Fans/motors/blowers, Furnace velocity,

Refrigerated Case, Paint spray booths.

2. BUTTONS

• Press "

" .The thermal sensor is heated up (5s). Measurement view

is opened: The current reading is displayed, or "----"lights up if no

reading is available. Press "

• Press "Man/Mix" to freeze or unfreeze the displayed readings or air

velocity Zero Adjust.

• Press "Enter" to enter a Setup option. Press "Enter" again to store

the displayed setting in memory.

" again, turn off the instrument.