Major tech MT945 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Major tech MT945. Major tech MT945 12 сторінок. Hot wire thermo anemometer
Друкувати сторінкуThe MT945 Hot Wire Thermo Anemometer is a microprocessor-based
device designed to simultaneously measure low air velocity and air
temperature. It utilizes a combination of a hot wire and a standard
thermistor to provide quick and accurate measurements. The slim
telescopic anemometer probe is well-suited for use in ducts and ventilation
systems. Monitoring air velocity and temperature readings together has
never been more convenient, thanks to the large backlit LCD display.
Additionally, the MT945 can record maximum and minimum readings,
allowing you to recall and hold data. Uploading and storing the measured
values into your computer is effortlessly accomplished through the built-in
USB interface.
Please read the following instructions carefully and always keep this
manual within easy reach.
1. FEATURES
• Thermal anemometer for very low air velocity measurement.
• Slim probe, ideal for grilles & diffusers.
• Combination of hot wire and standard thermistor, deliver rapid and
precise measurements even at low air velocity.
• Records Maximum and Minimum readings with recall.
• Microprocessor circuit assures maximum possible accuracy, provides
special functions and features.
• Large LCD with dual function meter's display, read the air velocity &
temp at the same time.
• Records Maximum and Minimum readings with recall.
• Air flow measurement: m/s, km/h, ft/min, MPH, Knots.
• Build in temperature °C, °F measurement.
• Thermistor sensor for Temp. measurement, fast response time.
• Used the durable, long-lasting components, including a strong, light
weight ABS-plastic housing case.
• Applications: Environmental testing, Air conveyors, Flow hoods, Clean
rooms, Air velocity, Air balancing, Fans/motors/blowers, Furnace velocity,
Refrigerated Case, Paint spray booths.
2. BUTTONS
• Press "
" .The thermal sensor is heated up (5s). Measurement view
is opened: The current reading is displayed, or "----"lights up if no
reading is available. Press "
• Press "Man/Mix" to freeze or unfreeze the displayed readings or air
velocity Zero Adjust.
• Press "Enter" to enter a Setup option. Press "Enter" again to store
the displayed setting in memory.
4
" again, turn off the instrument.