IKEA FRAMTID DOV8/2 Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch für Backofen IKEA FRAMTID DOV8/2 herunter. IKEA FRAMTID DOV8/2 20 Seiten. Framtid
Auch für IKEA FRAMTID DOV8/2: Benutzerhandbuch (20 seiten), Benutzerhandbuch (18 seiten)
Seite drucken
ENGLISH
To put the side rails back, follow the instruc-
tion in reverse.
Important! The rounded ends of the guide
bars must point to the front.
Changing the oven lamp and cleaning the
glass cover
Warning! Before you change the oven
lamp (refer to "Product description"),
switch off the appliance and disconnect it
from the electrical supply.
What to do if...
Problem
The oven does not op-
erate
The oven does not op-
erate
The temperature indi-
cator does not come
on
The oven lamp is not
working
Steam and condensa-
tion settle on the food
and in the oven cavity
"12.00" appears on
the display and the
clock LED is flashing
F11 appears on the
display
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, contact
your dealer or the After Sales Service.
Possible cause
The required setting have not
been set
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
The required setting have not
been set
The oven lamp bulb is faulty
Dishes have been left in the
oven for too long
Interruption of the power sup-
ply.
The plug of the meat probe is
not firmly in position in the
socket
1. Turn the glass cover anti - clockwise
and remove it. Clean the glass cover.
2. If necessary, replace the old oven lamp
with a 15/25 watt, 230V (50Hz), 300
°C heat resistant oven lamp (Connec-
tion type: E14).
3. Refit the glass cover.
check if cooking function and
temperature are selected
Check if the appliance is cor-
rectly connected and the mains
supply to the oven is on
Select the cooking function and
temperature
Replace the oven lamp bulb
Do not leave the dishes stand-
ing in the oven for longer than
15-20 minutes after the cooking
process ends
Reset the time
Insert the meat probe plug into
the socket in the side wall of the
oven as far as it can go
If you operated the appliance wrongly,
or the installation was not carried out
by a registered engineer, the visit from the
After Sales Service technician or dealer may
13
Solution