- ページ 13

オーブン IKEA FRAMTID DOV8/2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA FRAMTID DOV8/2 20 ページ。 Framtid
IKEA FRAMTID DOV8/2 にも：ユーザーマニュアル (20 ページ), ユーザーマニュアル (18 ページ)

ページを印刷する

ENGLISH

To put the side rails back, follow the instruc-

tion in reverse.

Important! The rounded ends of the guide

bars must point to the front.

Changing the oven lamp and cleaning the

glass cover

Warning! Before you change the oven

lamp (refer to "Product description"),

switch off the appliance and disconnect it

from the electrical supply.

What to do if...

Problem

The oven does not op-

erate

The oven does not op-

erate

The temperature indi-

cator does not come

The oven lamp is not

working

Steam and condensa-

tion settle on the food

and in the oven cavity

"12.00" appears on

the display and the

clock LED is flashing

F11 appears on the

display

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, contact

your dealer or the After Sales Service.

Possible cause

The required setting have not

been set

The appliance is not correctly

connected or/and the mains

supply to the oven is not on

The required setting have not

been set

The oven lamp bulb is faulty

Dishes have been left in the

oven for too long

Interruption of the power sup-

ply.

The plug of the meat probe is

not firmly in position in the

socket

1. Turn the glass cover anti - clockwise

and remove it. Clean the glass cover.

2. If necessary, replace the old oven lamp

with a 15/25 watt, 230V (50Hz), 300

°C heat resistant oven lamp (Connec-

tion type: E14).

3. Refit the glass cover.

check if cooking function and

temperature are selected

Check if the appliance is cor-

rectly connected and the mains

supply to the oven is on

Select the cooking function and

temperature

Replace the oven lamp bulb

Do not leave the dishes stand-

ing in the oven for longer than

15-20 minutes after the cooking

process ends

Reset the time

Insert the meat probe plug into

the socket in the side wall of the

oven as far as it can go

If you operated the appliance wrongly,

or the installation was not carried out

by a registered engineer, the visit from the

After Sales Service technician or dealer may

Solution