2KC Solutions GCH500 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Heizgerät 2KC Solutions GCH500 herunter. 2KC Solutions GCH500 4 Seiten. 500cc gas cylinder heater

Seite drucken

GCH500

500cc Gas Cylinder Heater

Overview

Natural gas sampling standards (GPA 2166 and API 14.1) recommend

that before using the ﬁ ll and empty method to collect a sample, the

cylinder must be preheated to a temperature above the hydrocarbon dew

point of the ﬂ owing gas stream. The GCH500 provides a simple, eﬃ -

cient solution to cylinder preheating. It consist of a heater enclosure and

a controller. The sample cylinder is preheated inside your vehicle on the

way to, or at, the sample location. Heating takes about 10 minutes. To

use the GCH500 just insert a clean empty cylinder into the heater enclo-

sure and connect the controller cable to the heater. Power for the heater

is taken from a vehicle 12 volt power point or cigarette lighter plug.

While heating, the sample cylinder's temperature can be monitored us-

ing the controller's display. When fully heated, the controller will keep

the cylinder at the set temperature (140°F) until you are ready to discon-

nect the controller from the heater and take the sample. The hot cylinder

stays in the heater enclosure until the sampling process is ﬁ nished to

provide a safe method to handle the heated cylinder while taking the

sample without the need for gloves.

Features

•

Designed to preheat a standard 2" OD 500cc gas sample cylinder

•

Low power (100 wa s @ 12V DC) plugs directly into a cigare e

lighter

•

Works with either stainless steel or aluminum cylinders

•

Quickly preheats cylinder to 140°F, Cold to Hot in about 10 minutes

•

Microprocessor based temperature controller with digital tempera-

ture display

•

Rugged plas c case provides a safe compact environment for heat-

ing the cylinder plus a safe and durable method for handling the

heated cylinder

•

Enclosure insulates heated cylinder to allow for addi onal hot sam-

pling me

•

Four heaters and four temperature sensors help insure uniform

hea ng of the sample cylinder

•

Increased safety provided by thermal fuses and transient protec on

diodes

Operator's Manual