2KC Solutions GCH500 Panduan Operator
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemanas 2KC Solutions GCH500. 2KC Solutions GCH500 4 halaman. 500cc gas cylinder heater
GCH500
500cc Gas Cylinder Heater
Overview
Natural gas sampling standards (GPA 2166 and API 14.1) recommend
that before using the fi ll and empty method to collect a sample, the
cylinder must be preheated to a temperature above the hydrocarbon dew
point of the fl owing gas stream. The GCH500 provides a simple, effi -
cient solution to cylinder preheating. It consist of a heater enclosure and
a controller. The sample cylinder is preheated inside your vehicle on the
way to, or at, the sample location. Heating takes about 10 minutes. To
use the GCH500 just insert a clean empty cylinder into the heater enclo-
sure and connect the controller cable to the heater. Power for the heater
is taken from a vehicle 12 volt power point or cigarette lighter plug.
While heating, the sample cylinder's temperature can be monitored us-
ing the controller's display. When fully heated, the controller will keep
the cylinder at the set temperature (140°F) until you are ready to discon-
nect the controller from the heater and take the sample. The hot cylinder
stays in the heater enclosure until the sampling process is fi nished to
provide a safe method to handle the heated cylinder while taking the
sample without the need for gloves.
Features
•
Designed to preheat a standard 2" OD 500cc gas sample cylinder
•
Low power (100 wa s @ 12V DC) plugs directly into a cigare e
lighter
•
Works with either stainless steel or aluminum cylinders
•
Quickly preheats cylinder to 140°F, Cold to Hot in about 10 minutes
•
Microprocessor based temperature controller with digital tempera-
ture display
•
Rugged plas c case provides a safe compact environment for heat-
ing the cylinder plus a safe and durable method for handling the
heated cylinder
•
Enclosure insulates heated cylinder to allow for addi onal hot sam-
pling me
•
Four heaters and four temperature sensors help insure uniform
hea ng of the sample cylinder
•
Increased safety provided by thermal fuses and transient protec on
diodes
130-0036 Rev 2, © copyright Microflex, LLC 2011-2017 - 2KC Solutions is a trademark of Microflex, LLC
Operator's Manual