CenturionPro Original Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Trimmer CenturionPro Original herunter. CenturionPro Original 20 Seiten.

Seite drucken

CLEANING & MAINTENANCE

STEP 1:

REMOVE COVER & IMPELLER

FROM LEAF COLLECTOR

• Remove 8 screws from the side panel to

uncover the leaf collector

• Remove the 13mm bolt & washer

located in the middle of the fan blades

• When removing the blower impeller,

use a pulling tool only.

Remove

8 screws

STEP 2:

PRESSURE WASH IMPELLER &

INTERIOR OF LEAF COLLECTOR

• Spray the impeller blades with your

pressure washer using hot water

• Tip the leaf collector up so that the

opening is in a drain position

• Spray the entire inside of the leaf

collector. Avoid spraying directly onto

the bearing

• To clean the outside of the unit, wipe the

leaf collector down with some isopropyl

alcohol to remove dirt and residue

AVOID SPRAYING

DIRECTLY ONTO

THE BEARING

INSTRUCTIONS:

Clean with pressure-washer at up to 1500 PSI, Hot

Water, Fan Spray Setting. Run LEAF COLLECTOR for 15

minutes after washing, allowing components to dry.

For more information or to watch our DIY video tutorials visit cprosolutions.com

13mm

bolt & washer

STEP 3:

CLEAN LEAF

COLLECTOR BAGS

• Unzip all three bags to

empty contents

• Turn leaf collector bags

inside-out seperately and

pressure wash each bag

• Allow bags to dry

Turn inside-out

to pressure wash

and let dry.

Tilt the leaf

collector to drain

from the opening

FOR OPTIMAL PERFORMANCE AND LIFE, THE

LEAF COLLECTOR

CLEANED EVERY 30 DAYS OR 100 HRS OF USE.

AVOID WATER CONTACT ON BEARINGS

AND MOTOR.

OWNERS MANUAL

THE ORIGINAL & SILVER BULLET

LEAF COLLECTOR CLEANING

ONLY USE A 6" 3-JAW PULLING

TOOL

REMOVING THE BLOWER IMPELLER

FOR CLEANING. CLEAN BLOWER

EVERY 30-40 DAYS OF USE.

Black Mesh Bag

White Filter Bag

**INSTALLATION IS REVERSE ORDER OF REMOVAL

COMPONENTS MUST BE

(NOT INCLUDED)

WHEN

Outer Polyester Bag