Gannet Lite Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drohnen Gannet Lite herunter. Gannet Lite 19 Seiten.

Compass Calibration

Turn on the female controller and turn on the quadcopter.

Quickly switch back and forth between the GPS model attitude mode /

return mode of SWB switch for about 5-9 times (GPS mode

- return mode - GPS mode is one time) until the LED indicator is keep

yellow all the time:

Horizontal calibration and

make the quadcopter

direction of gravity axis and

rotate about 360" until the

green tight is always on.

Vertical calibration. Make sure the

aircraft is erected downwards, the direction of gravity is the axis rotation

(about 360°), until the green flash is off, the calibration is completed.

lf the calibration is successful; the calibration mode will automatically

exit, and the LED will flash normally; the calibration will fail, and the red

light will flash. Currently, switch the control mode again to cancel the

current calibration state, and then recalibrate from the second step.

Be sure to calibrate the compass when you are flying for the

first time or changing a flight area.

When calibrating, please make sure the surrounding area is

relatively empty, away from strong magnetic environment,

such as magnetic field, high voltage line, parking lot,

building area with underground steel bars etc

Do not carry magnets with you when calibrating, such as

keys, mobile phones etc.

If there is a circle or hovering instability in the GPS hover

mode during flight, please stop immediately and refer to the

above requirements for the enjoinment to calibrate

compass.