Gannet Lite User Manual - Page 14
Browse online or download pdf User Manual for Drones Gannet Lite. Gannet Lite 19 pages.
Print Page
Compass Calibration
1)
Turn on the female controller and turn on the quadcopter.
2)
Quickly switch back and forth between the GPS model attitude mode /
return mode of SWB switch for about 5-9 times (GPS mode
- return mode - GPS mode is one time) until the LED indicator is keep
yellow all the time:
3)
Horizontal calibration and
make the quadcopter
direction of gravity axis and
rotate about 360" until the
green tight is always on.
4)
Vertical calibration. Make sure the
aircraft is erected downwards, the direction of gravity is the axis rotation
(about 360°), until the green flash is off, the calibration is completed.
5)
lf the calibration is successful; the calibration mode will automatically
exit, and the LED will flash normally; the calibration will fail, and the red
light will flash. Currently, switch the control mode again to cancel the
current calibration state, and then recalibrate from the second step.
1.
Be sure to calibrate the compass when you are flying for the
first time or changing a flight area.
2.
When calibrating, please make sure the surrounding area is
relatively empty, away from strong magnetic environment,
such as magnetic field, high voltage line, parking lot,
building area with underground steel bars etc
3.
Do not carry magnets with you when calibrating, such as
keys, mobile phones etc.
4.
If there is a circle or hovering instability in the GPS hover
mode during flight, please stop immediately and refer to the
above requirements for the enjoinment to calibrate
compass.