IKEA DATID HGA4K Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld IKEA DATID HGA4K herunter. IKEA DATID HGA4K 16 Seiten. Lagan
Auch für IKEA DATID HGA4K: Anweisungen (4 seiten), Handbuch (24 seiten), Montageanleitung Handbuch (20 seiten), Handbuch (12 seiten)

Seite drucken

ENGLISH

The bottom of the cookware should be as thick

and flat as possible.

Care and cleaning

Warning! Switch the appliance off and

let it cool down before you clean it.

Warning! For safety reasons, do not

clean the appliance with steam blasters

or high-pressure cleaners.

Warning! Do not use abrasive cleaners,

steel wool pads or acids, they will

damage the appliance.

To remove any food remains wash the enam-

elled elements, "caps" and "crowns", with

warm soapy water.

Stainless steel elements wash with water, and

then dry with a soft cloth.

What to do if...

Problem

There is no spark when light-

ing the gas

The flame is blowing out im-

mediately after lightning

The gas ring burns unevenly

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a sol-

ution to the problem yourself, contact your

dealer or the After Sales Service.

This model is equipped with electrical ignition,

it is obtained through ceramic "candle" and

electrode.

Keep them well clean to avoid difficult light-

ning.

pipe and the pressure adjuster, if it is fitted (this

service is not free of charge).

After cleaning, be sure to wipe dry with a soft

cloth.

Possible cause

There is no electrical supply

Burner cap and Crown are

placed uneven

Thermocouple is not heated

enough

Burner crown is blocked with

food residues

registered engineer, the visit from the customer

service technician or dealer may not take

place free of charge, even during the warranty

period.

Periodically ask your local Service Centre

to check the conditions of the gas supply

Check that the unit is plugged

in and the electrical supply is

switched on.

Check the house electric in-

stallation fuse.

Check the burner cap and

crown have been replaced

correctly, e.g. after cleaning.

After lightning the flame, keep

the knob pushed for about 5

sec.

Check the main injector is not

blocked and the burner crown

is clear of food particles.

If you operated the appliance wrongly, or

the installation was not carried out by a

Remedy