Century Helicopter Products NEO 660 Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Spielzeug Century Helicopter Products NEO 660 herunter. Century Helicopter Products NEO 660 16 Seiten.
Seite drucken
BUILD PHOTOS (USING NEO 600 AS EXAMPLE)
1
Using short tube holder (#4) and motor mount-
ing plate (#3) assemble the arm together.
4
Select type of battery connector (not includ-
ed) and solder all ESC and DJI BEC on power
distribution panel.
7
Flip the assembly over and the DJI NAZA control-
ler as shown.
10
Take a moment to get an understanding of which wires relates to which connectors and take the lower
frame plate and lay it out.
2
Assemble the NEO 600 lower frame plate and
aluminum threaded arm mounts.
5
It is optional to add a disconnect for the BEC for
quick removal from the power distribution panel.
Photo shows a completed power distribution
board.
8
Insert plastic "T" joints over the aluminum landing
gear tubes and use the set screws and self tap-
ing screws to lock together.
11
Page 14
NEO 600 & 660
3
Turn over the lower frame plate and install the
landing gear aluminum posts and distributing
panel hex posts.
6
Install the power distribution board in between-
the lower frame plate and the landing gear
plate.
9
Make two sets of gear assemblies to complete
the landing gear, NEO 600 uses 200mm tubes
and 660 uses 260mm tubes.