Century Helicopter Products NEO 660 Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Giocattolo Century Helicopter Products NEO 660. Century Helicopter Products NEO 660 16.
BUILD PHOTOS (USING NEO 600 AS EXAMPLE)
1
Using short tube holder (#4) and motor mount-
ing plate (#3) assemble the arm together.
4
Select type of battery connector (not includ-
ed) and solder all ESC and DJI BEC on power
distribution panel.
7
Flip the assembly over and the DJI NAZA control-
ler as shown.
10
Take a moment to get an understanding of which wires relates to which connectors and take the lower
frame plate and lay it out.
2
Assemble the NEO 600 lower frame plate and
aluminum threaded arm mounts.
5
It is optional to add a disconnect for the BEC for
quick removal from the power distribution panel.
Photo shows a completed power distribution
board.
8
Insert plastic "T" joints over the aluminum landing
gear tubes and use the set screws and self tap-
ing screws to lock together.
11
Page 14
NEO 600 & 660
3
Turn over the lower frame plate and install the
landing gear aluminum posts and distributing
panel hex posts.
6
Install the power distribution board in between-
the lower frame plate and the landing gear
plate.
9
Make two sets of gear assemblies to complete
the landing gear, NEO 600 uses 200mm tubes
and 660 uses 260mm tubes.