Century Helicopter Products Predator 70 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug Century Helicopter Products Predator 70 herunter. Century Helicopter Products Predator 70 20 Seiten.
Seite drucken
M3x10
Socket Screw
M3x12
Socket
Screw
#HW6112A Battery Tray &
Vertical Front Frame
Attach two M3x12 Socket screws from the inside of the
battery tray at the forward holes and two M3x10 Socket
screws to the rear holes. Attach the vertical frame (note
flanges are rearward) to the battery tray with M3x8 screws.
#HI6138 Fuel Tank &
Fittings
Assemble the fuel tank fittings. Gently bend the vent line and
test until it reaches the top of the fuel tank. Order is larger
outside cap, rubber stopper, smaller inside cap. Test the
pickup line so it can move freely in the fuel tank.
#HW6125
Front Short
Canopy
Mount
Rubber
Insulator
Install the rubber insulators to the frames. Install the left side
front lower frame over the M3 threaded studs on the battery
tray. Attach the shorter canopy standoff to the front stud and a
locknut to the rear stud. Attach the longer, rear canopy
standoff to the upper frames using M3x10 Button head screw
from the inside of the frames.
8
26mm
Threaded Hex
Standoff
M3x8
Socket
Screw &
Locknut
M2.5x18
Self Tap
Screw
#HW6125
Rear Canopy
Mount w/
M3x8 Button
Head Screw
M3
Locknut
#HI6115 Front
Lower Frame
#HW6112
Servo Side
Frames
31
15mm
Standoffs x 4
Attach the servo frames, battery tray and upper frames
together using M3x25 Socket screws. It is best to apply
locktight directly to the standoffs through the side frame holes
instead of the screws.
#HI6138 Fuel Tank & Fittings
33
Side tube
for pickup.
After the fuel tank fittings are inserted, tighten the M2.5x18
self tap screw and attach the cable tie around the outside of
the stopper.
#HW6125
35
Front
Canopy
Mount
Install fuel tank (only fits one way) and attach the other front
lower side frame. Similarly secure it to the vertical frame with
M3x8 socket screws and locknuts.
32
M3x25
Socket
Screw
Upper tube for
vent line.
Cable Tie
34
36
M3x8
Socket
Screw &
Locknut