IKEA HGC4K Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Kochfeld IKEA HGC4K herunter. IKEA HGC4K 44 Seiten. Hobs
Auch für IKEA HGC4K: Benutzerhandbuch (44 seiten)

Seite drucken

1. Installation

ENGLISH

Technical data

Rating Plate

Made in Germany

301.561.89

21552

PQM

The graphic above represents rating plate of

the appliance (without serial number which is

generated dynamically during the production

process), which is located at its underneath

surface of the casing.

Installation

Manufacturer is not responsible for any injury

to persons and pets or damage to property

caused by failure to comply following require-

ments.

Caution! To proceed with the

installation refer to the assembly

instructions.

Warning! Installation process must

follow the laws, ordinances, directives

and standards (electrical safety rules and

regulations, proper recycling in accordance

with the regulations, etc.) in force in the

country of use!

Warning! The appliance must be

earthed!

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of volt-

age.

Model FRAMTID HGC4K Typ 58 PEE 13 AO 6.5kW

PNC 949 593 389 01 S NO ............... 220V-240V AC 50-60 Hz

Dear Customer, please apply here aside the

sticker you can find in the dedicate plastic

bag inserted inside the hob packaging. This

will allow us to assist you better, by identify-

ing precisely your hob, in case you will need

in future our assistance. Thank you for your

help!

• Loose and inappropriate plug and socket

connections can make the terminal over-

heat.

• Have the clamping connections correctly in-

stalled.

• Use strain relief clamp on cable.

• Follow the connection diagram (it is loca-

ted on the underneath surface of the cast-

ing of the hob).

Important! You must observe the minimum

distances to other appliances and furniture

cabinets or other units according to Assembly

Instruction.

If there is no oven beneath the hob insert a di-

viding panel at a minimum distance of 20 mm

from the bottom of the hob.

Do not use silicon sealant between the appli-

ance and the worktop. Avoid installing the ap-

pliance next to doors and under windows as

hot cookware may be knocked off the rings

when doors and windows are opened.

230 V

DGT