Ganz C-AllView Ti Handbuch für Installateure - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Installateure für Sicherheitskamera Ganz C-AllView Ti herunter. Ganz C-AllView Ti 20 Seiten.

4 Offer the camera to the mount adaptor and clip the

lanyard onto the lug of the mount adaptor. In

addition to being an essential safety device during

operation, the lanyard is useful as a temporary

hanging point when the camera is being

mounted in the inverted position.

5 Carefully note the orientation notch-

es of cable connector and camera

socket. Align the notches accordingly

and insert the connector onto the socket

of the camera base. Twist the connector's

retaining ring until it locks into place.

6 Remove the four hex head bolts from

the camera base and push the connector

back into the mount adaptor.

7 Align the four holes of the mount adaptors with those on the camera base and

insert the four hex head bolts.

8 Tighten the bolts to approximately 1.6Kg/m. Do not over tighten bolts.

IMPORTANT: Ensure that the lanyard is connected to the appropriate lug

on the mount adaptor when the camera mounting is complete. Also, dou-

ble check all bolts for correct positioning and appropriate tightness.