Ganz C-AllView Ti 설치 관리자 매뉴얼 - 페이지 6

{카테고리_이름} Ganz C-AllView Ti에 대한 설치 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz C-AllView Ti 20 페이지.

4 Offer the camera to the mount adaptor and clip the

lanyard onto the lug of the mount adaptor. In

addition to being an essential safety device during

operation, the lanyard is useful as a temporary

hanging point when the camera is being

mounted in the inverted position.

5 Carefully note the orientation notch-

es of cable connector and camera

socket. Align the notches accordingly

and insert the connector onto the socket

of the camera base. Twist the connector's

retaining ring until it locks into place.

6 Remove the four hex head bolts from

the camera base and push the connector

back into the mount adaptor.

7 Align the four holes of the mount adaptors with those on the camera base and

insert the four hex head bolts.

8 Tighten the bolts to approximately 1.6Kg/m. Do not over tighten bolts.

IMPORTANT: Ensure that the lanyard is connected to the appropriate lug

on the mount adaptor when the camera mounting is complete. Also, dou-

ble check all bolts for correct positioning and appropriate tightness.