Airflow ecoDRY 550 ABS Installations- und Betriebshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Trockner Airflow ecoDRY 550 ABS herunter. Airflow ecoDRY 550 ABS 6 Seiten.
Seite drucken1. Overview
ecoDRY 550 Hand Dryers are available in two finishes; White ABS Plastic and Satin Die Cast
Aluminium.
Technical Data of these hand dryers is as follows:
Supply Voltage – 220-240V
Frequency – 50-60Hz
Absorption (power) total – 550 Watts
Protection Level – IP23
Electrical Insulation – Class II
Airflow Performance – 150m³/hr / 2,500l/min
Dimensions – (H) 285mm x (W) 221mm x (D) 157mm
Weight – 3Kg (ABS) 5Kg (Metal)
2. Mechanical Installation
The ecoDRY hand dryer should be installed at a minimum height of 120cm (from the ground to the
air outlet/ bottom of the dryer). The hand dryer should be positioned at least 60cm from a bathtub,
shower or hand basin. Where multiple dryers are being installed alongside each other, allow enough
space for people to access the dryer. Also, if installing next to an adjoining wall, the dryer should be
positioned at least 200mm from this wall to allow for proper access.
Fix the hand dryer to the wall with the fixing kit provided using the enclosed template to mark out
where the holes should be drilled. You should ensure that the electrical supply (tension) does not
exceed the maximum power of the apparatus (220 -240V). This product is intended for installation
by a suitably qualified person.
Dimensions
Figure 1
Front Cover Removal
Before installation can commence you need to remove the front cover by unscrewing the two
screws at the bottom of the cover (see Figure 2). When the hand dryer is fixed to the wall, the cover
should be replaced and the two screws tightened accordingly.
.
Figure 2
Page 2 of 6