Airflow ecoDRY 550 ABS Manuale d'installazione e d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Asciugatrice Airflow ecoDRY 550 ABS. Airflow ecoDRY 550 ABS 6.

1. Overview

ecoDRY 550 Hand Dryers are available in two finishes; White ABS Plastic and Satin Die Cast

Aluminium.

Technical Data of these hand dryers is as follows:

Supply Voltage – 220-240V

Frequency – 50-60Hz

Absorption (power) total – 550 Watts

Protection Level – IP23

Electrical Insulation – Class II

Airflow Performance – 150m³/hr / 2,500l/min

Dimensions – (H) 285mm x (W) 221mm x (D) 157mm

Weight – 3Kg (ABS) 5Kg (Metal)

2. Mechanical Installation

The ecoDRY hand dryer should be installed at a minimum height of 120cm (from the ground to the

air outlet/ bottom of the dryer). The hand dryer should be positioned at least 60cm from a bathtub,

shower or hand basin. Where multiple dryers are being installed alongside each other, allow enough

space for people to access the dryer. Also, if installing next to an adjoining wall, the dryer should be

positioned at least 200mm from this wall to allow for proper access.

Fix the hand dryer to the wall with the fixing kit provided using the enclosed template to mark out

where the holes should be drilled. You should ensure that the electrical supply (tension) does not

exceed the maximum power of the apparatus (220 -240V). This product is intended for installation

by a suitably qualified person.

Dimensions

Figure 1

Before installation can commence you need to remove the front cover by unscrewing the two

screws at the bottom of the cover (see Figure 2). When the hand dryer is fixed to the wall, the cover

should be replaced and the two screws tightened accordingly.

Figure 2

Page 2 of 6