Decoproyec CP19 Betriebs- und Wartungshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungshandbuch für Farbspritzgerät Decoproyec CP19 herunter. Decoproyec CP19 8 Seiten.

Seite drucken
The air outlet through the needle is continuous in this mode regardless of when the
trigger is pulled.
To change from the Valve Mode to the Continuous Air Mode, follow these steps:
1) Disassemble the product regulator
out
(no.13
2) Insert an Allen key size 4 at the back of the needle, whose cap has an Allen groove
(no.10
of the exploded view
3) Turn the Allen key counterclockwise to unlock the cap. Be careful when removing
the cap enough to open the continuous air holes but it can NEVER protrude the
needle.

6. WORKING INSTRUCTIONS

The size of the drop can be adjusted with the product regulator
turning clockwise you get bigger drops and counterclockwise smaller drops.
It is also important to know that the higher the product viscosity, the bigger the sprayed drops
will be.
)
of the exploded view
).
INSTRUCTION AND MAINTENANCE MANUAL
(no.12
of the exploded view
4
) and take the spring
Tighten the cap
Turn clockwise
Loosen the cap
Turn
counterclockwise
(no.12
of the exploded view
);