Decoproyec CP19 지침 및 유지보수 매뉴얼 - 페이지 4
{카테고리_이름} Decoproyec CP19에 대한 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Decoproyec CP19 8 페이지.
페이지 인쇄The air outlet through the needle is continuous in this mode regardless of when the
trigger is pulled.
To change from the Valve Mode to the Continuous Air Mode, follow these steps:
1) Disassemble the product regulator
out
(no.13
2) Insert an Allen key size 4 at the back of the needle, whose cap has an Allen groove
(no.10
of the exploded view
3) Turn the Allen key counterclockwise to unlock the cap. Be careful when removing
the cap enough to open the continuous air holes but it can NEVER protrude the
needle.
6. WORKING INSTRUCTIONS
The size of the drop can be adjusted with the product regulator
turning clockwise you get bigger drops and counterclockwise smaller drops.
It is also important to know that the higher the product viscosity, the bigger the sprayed drops
will be.
)
of the exploded view
).
INSTRUCTION AND MAINTENANCE MANUAL
(no.12
of the exploded view
4
) and take the spring
Tighten the cap
Turn clockwise
Loosen the cap
Turn
counterclockwise
(no.12
of the exploded view
);