Ganz ZN-D2024 Handbuch zur Schnellinstallation - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für IP-Kamera Ganz ZN-D2024 herunter. Ganz ZN-D2024 13 Seiten. Indoor ip dome camera
Seite drucken
3
Hardware Installation
First, use the supplied screwdriver to detach the dome cover from the camera base. Then,
follow the steps below to install the camera; either to a ceiling or to a wall.
When mounting to a ceiling
Through the two holes on each side of the camera base, insert the supplied two screws
to corresponding holes and secure them with a screwdriver.
When mounting to a wall
1. Attach the alignment sticker to the wall.
2. Through the two circles on the sticker, drill two pilot holes into the wall.
3. Hammer the supplied plastic anchors into the holes.
4. Align the two holes on each side of the camera base with the two plastic anchors on
the wall, insert the supplied screws to corresponding holes and secure them with a
screwdriver.
Alignment sticker
5