Ganz ZN-D2024 Руководство по быстрой установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для IP-камера Ganz ZN-D2024. Ganz ZN-D2024 13 страниц. Indoor ip dome camera

Hardware Installation

First, use the supplied screwdriver to detach the dome cover from the camera base. Then,

follow the steps below to install the camera; either to a ceiling or to a wall.

When mounting to a ceiling

Through the two holes on each side of the camera base, insert the supplied two screws

to corresponding holes and secure them with a screwdriver.

When mounting to a wall

1. Attach the alignment sticker to the wall.

2. Through the two circles on the sticker, drill two pilot holes into the wall.

3. Hammer the supplied plastic anchors into the holes.

4. Align the two holes on each side of the camera base with the two plastic anchors on

the wall, insert the supplied screws to corresponding holes and secure them with a

screwdriver.

Alignment sticker