KitchenAid KDFX 6030 Produktblatt - Seite 10
Blättern Sie online oder laden Sie pdf Produktblatt für Geschirrspüler KitchenAid KDFX 6030 herunter. KitchenAid KDFX 6030 16 Seiten.
Seite drucken
Once regeneration salt is added, immediately start a wash programme (the "Pre-wash" programme
alone is not sufficient). Residual saline solution or grains of salt can lead to deepdown corrosion,
irreparably damaging the stainless steel components. The guarantee is not applicable if faults are
caused by such circumstances.
The salt level indicator lamp may remain lit for the duration of several wash cycles.
If the water hardness level falls within category 1 (soft), no salt is required.
c. How to set the water hardness level
- Switch on the appliance.
- Select the 2nd programme "P2" - consult the table 1.1 in page 5.
- Press the START button for at least 5 seconds until the START indicator lamp flashes.
- The set water hardness level is shown on the display (if present) or the START button flashes.
- With each successive touch of the START button the setting increases and when it reaches 7 it returns to
1 again.
- The appliance must be switched off to memorise the new setting.
Water hardness
German
degrees
°dH
1 soft
0 -5
1 - 2 medium
6 - 10
2 medium
11 - 15
3 medium-hard
16 - 21
4 hard
22 - 28
4 very hard
29 - 35
4 extremely
36 - 60
hard
Water hardness level is factory set at 3 for medium-hard water (display 4 or 4 flashes of the START
button).
Water hardness level 4 with combined action detergent
Even if you use a combined action detergent which includes salt, you must still add regeneration salt
since such detergents are not effective enough at softening hard water. If the appliance is equipped
with the function "Select detergent" (see chapter "Overview"), set the detergent dispenser system to
the "no salt" setting so that the salt indicator lamp remains activated ("Detergent with rinse aid").
French
English
Flashing frequency
degrees
degrees
or display setting
°fH
°eH
0 - 9
0 - 6.3
10 - 18
7 - 12.6
19 - 27
13.3 - 18.9
28 - 37
19.6 - 25.9
38 - 50
26.6 - 35
51 - 63
35.7 - 44.1
64 - 107
44.8 - 74.9
1/1x
2/2x
3/3x
4/4x
5/5x
6/6x
7/7x
10