KitchenAid KDFX 6030 Karta produktu - Strona 10

Przeglądaj online lub pobierz pdf Karta produktu dla Zmywarka KitchenAid KDFX 6030. KitchenAid KDFX 6030 16 stron.

Drukuj stronę

Once regeneration salt is added, immediately start a wash programme (the "Pre-wash" programme

alone is not sufficient). Residual saline solution or grains of salt can lead to deepdown corrosion,

irreparably damaging the stainless steel components. The guarantee is not applicable if faults are

caused by such circumstances.

The salt level indicator lamp may remain lit for the duration of several wash cycles.

If the water hardness level falls within category 1 (soft), no salt is required.

c. How to set the water hardness level

- Switch on the appliance.

- Select the 2nd programme "P2" - consult the table 1.1 in page 5.

- Press the START button for at least 5 seconds until the START indicator lamp flashes.

- The set water hardness level is shown on the display (if present) or the START button flashes.

- With each successive touch of the START button the setting increases and when it reaches 7 it returns to

1 again.

- The appliance must be switched off to memorise the new setting.

Water hardness

German

degrees

°dH

1 soft

0 -5

1 - 2 medium

6 - 10

2 medium

11 - 15

3 medium-hard

16 - 21

4 hard

22 - 28

4 very hard

29 - 35

4 extremely

36 - 60

hard

Water hardness level is factory set at 3 for medium-hard water (display 4 or 4 flashes of the START

button).

Water hardness level 4 with combined action detergent

Even if you use a combined action detergent which includes salt, you must still add regeneration salt

since such detergents are not effective enough at softening hard water. If the appliance is equipped

with the function "Select detergent" (see chapter "Overview"), set the detergent dispenser system to

the "no salt" setting so that the salt indicator lamp remains activated ("Detergent with rinse aid").

French

English

Flashing frequency

degrees

or display setting

°fH

°eH

0 - 9

0 - 6.3

10 - 18

7 - 12.6

19 - 27

13.3 - 18.9

28 - 37

19.6 - 25.9

38 - 50

26.6 - 35

51 - 63

35.7 - 44.1

64 - 107

44.8 - 74.9

1/1x

2/2x

3/3x

4/4x

5/5x

6/6x

7/7x