KitchenAid KUDD01DPPA0 Installationsanleitung Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Geschirrspüler KitchenAid KUDD01DPPA0 herunter. KitchenAid KUDD01DPPA0 16 Seiten. Drawer dishwasher
Seite drucken
10,LaythemetaH p ilate o ntheback ofthecustom front
panel
11,AHign thecenterHine
marked o nthecustom paneH w iththe
diamond shape andnotchinthemetaH p ilate t o center t he
metaH p ilate h odzontaHHy,
AHign t hehodzontaH
Hine w iththe
topofthemetaH p ilate,
horizontal line
[
top of plate
centerline
15, Line up the bracket holies with the pin holies and repHace
each pin so that the pin Hine is vertical
/
16, Repeat steps 2-15 for other custom panel
12, Using the screws provided, fasten the metal plate to the front
panel through the 3 inner holes.
J
,Z
three
innerholes
13, Connect
the medaHHion
connector
to the dishwasher
connector,
lower front
panel
end of rnedallic
connector
14, Slide
the metai
pilate tabs
into
the notches
and shots on
the dishwasher
and gentiy
puii up to Hock in piace,
Option
2: _nsta{I custom
toe pane_
Oustom toe pane_ dimensions
5" (12J crn)
max,
(varies)
2_5/32 ,,
(55 ram)
f
,_
23-1/2" (59,7 cm)
The black prefinished toe panel can also have a custom front
panel with a thickness from 3/8" to 3/4" (9-19 mm) attached to it.
Determine the height of the toe panel custom panel: The
minimum height is 2-3/4" (70.5 mm). Measure from the top of the
adjacent cabinet door front to the floor. Subtract 28-15/32"
(72.3 cm) for needed toe panel height.
NOTES: Depending on countertop height, you may not have to
trim the toe panel.
Rugs placed in front of dishwasher could interfere with
toe panel. Clearance between floor and toe panel may
need to include the rug thickness.
1, Prepare the custom toe panel to specifications
shown above.
2, Lay the custom toe panel face down.
3, Fasten the biack plastic toe panel on the back of the custom
toe panel with the screws provided with the dishwasher.
plastic
toe panel
I i
I I
_ustorn
toe panel
4, Partially open bottom drawer. Position custom toe panel
behind door and slide on the underside of tub.
5, Close the drawer and slide the toe panel back onto mounting
rails.
14