Green Sun HydroFalls Produkthandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Produkthandbuch für Rasen- und Gartengeräte Green Sun HydroFalls herunter. Green Sun HydroFalls 15 Seiten.

Seite drucken

Horizontal installation for 2 or more units

Installation sequence as shown below:

5th ﬂower pot

3rd ﬂower pot

1st ﬂower pot

2nd ﬂower pot

1st ﬂower pot

For a Horizontal installation

Mark on the wall the ﬁrst unit with 4 hole positions (281mm x 90mm apart). Then mark the same hole positions

289mm next the ﬁrst unit. Once the lower level is ﬁnish, user can mark the upper level positions 91mm above the

below level and so on. Refer to (Fig. 8)

Start with the lowest level mounting Brackets installation, then slide the planter body over it . Make sure there is

enough space for the planter to slide in. Make sure the lower level is ﬁnish before the user can start with the

upper level installation. Refer to (Fig. 8 & Fig. 8.1)

90 mm

91 mm

90 mm

91 mm

90 mm

47.5 mm

Fig. 8

Fig. 8.1

5th ﬂower pot

6th ﬂower pot

4th ﬂower pot

3rd ﬂower pot

4th ﬂower pot

2nd ﬂower pot

1st ﬂower pot

2nd ﬂower pot

281 mm

289 mm

281 mm

5th ﬂower pot

6th ﬂower pot

3th ﬂower pot

4th ﬂower pot

1st ﬂower pot

2nd ﬂower pot

Installing the Mounting Brackets

If installing into a sound masonry wall, use an 8mm drill

bit. Drill 4 holes 35mm deep and install the wall plugs.

Refer to (Fig. 9 & Fig. 9.1)

35 mm

8 mm

Fig. 9

Fig. 9.1

If installing into a sound timber structure, use a 3mm drill

bit to drill 4 holes 35mm deep. Refer to (Fig. 10)

35 mm

3 mm

Fig.10

Install the mounting brackets

using the screw provided. Make

sure to secure tightly so there is

no movement in the brackets.

Refer to (Fig. 12)

Check the level of the brackets using a spirit

level prior to tightening all the mounting screws.

It is important to get the horizontal level correct

so the water ﬂow within the system operates

correctly. Refer to (Fig. 11 & Fig. 11.1)

Fig. 11

Fig. 11.1

Fig. 12