Avantco 177DDPO18SA Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Küchengeräte Avantco 177DDPO18SA herunter. Avantco 177DDPO18SA 15 Seiten. Countertop electric pizza oven

Seite drucken

Serial Plates

The serial plate is located on the back of the unit.

IMMEDIATELY INSPECT FOR SHIPPING DAMAGE

All equipment should be examined for damage before and during unloading. The freight

carrier has assumed responsibility for its safe transit and delivery. If equipment is received

damaged, either apparent or concealed, a claim must be made with the delivering carrier.

Example of serial plate:

ITEM: 177DDPO18DDM

DESCRIPTION: DIGITAL PIZZA CTOP

OVEN DBL, 18", 2 DOORS

VOLTAGE: 240V

WATTS: 3200W

HERTZ: 60 HERTZ

AMPERAGE: 13.3A PLUG TYPE: 6-20P

SERIAL #:

WARNING! Improper installation, adjustment, alteration, service or maintenance can cause property

damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly

before installing or servicing this equipment. Commercial use only. WARNING! Disconnect from electric

supply before adjustment, alteration, service, or maintenance. Do not immerse in water.

a) Apparent damage or loss must be noted on the freight bill at the time of delivery.

It must then be signed by the carrier representative (Driver). If this is not done, the

carrier may refuse the claim. The carrier can supply the necessary forms.

b) If concealed damage is not apparent until after equipment is uncrated, a request

for inspection must be made to the carrier within 5 days. The carrier should arrange

an inspection. Be certain to hold all contents and packaging material. Installation

and service should be performed by a qualified installer who thoroughly reads,

understands, and follows these instructions.

If you have questions concerning the installation, operation, maintenance, or service

of this product, visit Avantco Equipment at www.avantcoequipment.com.

www.AvantcoEquipment.com

User Manual

MADE IN CHINA

4010483

CONFORMS TO UL STD. 197

CONFORMS TO NSF/ANSI STD. 4

PHASE: 1 PHASE