Avantco 177DDPO18SA Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Кухонна техніка Avantco 177DDPO18SA. Avantco 177DDPO18SA 15 сторінок. Countertop electric pizza oven
Друкувати сторінку
Serial Plates
The serial plate is located on the back of the unit.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All equipment should be examined for damage before and during unloading. The freight
carrier has assumed responsibility for its safe transit and delivery. If equipment is received
damaged, either apparent or concealed, a claim must be made with the delivering carrier.
Example of serial plate:
ITEM: 177DDPO18DDM
DESCRIPTION: DIGITAL PIZZA CTOP
OVEN DBL, 18", 2 DOORS
VOLTAGE: 240V
WATTS: 3200W
HERTZ: 60 HERTZ
AMPERAGE: 13.3A PLUG TYPE: 6-20P
SERIAL #:
WARNING! Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly
before installing or servicing this equipment. Commercial use only. WARNING! Disconnect from electric
supply before adjustment, alteration, service, or maintenance. Do not immerse in water.
a) Apparent damage or loss must be noted on the freight bill at the time of delivery.
It must then be signed by the carrier representative (Driver). If this is not done, the
carrier may refuse the claim. The carrier can supply the necessary forms.
b) If concealed damage is not apparent until after equipment is uncrated, a request
for inspection must be made to the carrier within 5 days. The carrier should arrange
an inspection. Be certain to hold all contents and packaging material. Installation
and service should be performed by a qualified installer who thoroughly reads,
understands, and follows these instructions.
If you have questions concerning the installation, operation, maintenance, or service
of this product, visit Avantco Equipment at www.avantcoequipment.com.
www.AvantcoEquipment.com
User Manual
MADE IN CHINA
4010483
4010483
CONFORMS TO UL STD. 197
CONFORMS TO NSF/ANSI STD. 4
PHASE: 1 PHASE
3