GAP SUPER C Installations- und Montageanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Installations- und Montageanleitung für Antenna GAP SUPER C herunter. GAP SUPER C 17 Seiten.

beam with the 1/8" holes. Install 14 clips to hold the mesh as shown below. When applying the clips keep the mesh taut to

obtain a flat surface mesh. A flat surface looks nice, but electrically it doesn't matter

B. Locate the two 24" x 23 ½ " mesh pieces. Place them over the 24" x 24" frame. In so doing you will place

one edge over the mesh already covering the 1/8" holes. Refer to the figure below.

D. Now locate the 5/16" stainless steel hex self-tapping screws and washers. Secure both meshes to the

box beams, using the screws, washers and nut driver supplied. A total of 20 screws are required.