GarageAce R5 Installationsanleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Garagentoröffner GarageAce R5 herunter. GarageAce R5 20 Seiten. Roller garage door opener

Seite drucken

3. Tools Required

Adjustable

Drill

Socket wrench

Wrench

≥250MM Socket

Philips-head

Ladder

Marker Pen

13MM Socket

Extension

Screwdriver

6.5MM Drill Bit

4. Door Requirements

The maximum allowable door height is 5.5m. The door must be of continuous corrugated sheet construction

and spring balanced. Door axle diameter must not exceed 35mm.

Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller

door drum is on the edge of the curtain or is a smaller diameter, additional clearance may be required.

If the drum is more than 60 mm from the curtain edge or of a smaller diameter, an extension

pole kit may be required (Section 11).

Ensure there is a power point near the opener.

NOTE:The drive is intended to be installed at least 2.5 m above the floor or other access level.