- ページ 6

ガレージドアオープナー GarageAce R5のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。GarageAce R5 20 ページ。 Roller garage door opener

3. Tools Required

Adjustable

Drill

Socket wrench

Wrench

≥250MM Socket

Philips-head

Ladder

Marker Pen

13MM Socket

Extension

Screwdriver

6.5MM Drill Bit

The maximum allowable door height is 5.5m. The door must be of continuous corrugated sheet construction

and spring balanced. Door axle diameter must not exceed 35mm.

Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller

door drum is on the edge of the curtain or is a smaller diameter, additional clearance may be required.

If the drum is more than 60 mm from the curtain edge or of a smaller diameter, an extension

pole kit may be required (Section 11).

Ensure there is a power point near the opener.

NOTE:The drive is intended to be installed at least 2.5 m above the floor or other access level.