CORNING Eclipse Anweisungen
Blättern Sie online oder laden Sie pdf Anweisungen für Racks & Ständer CORNING Eclipse herunter. CORNING Eclipse 5 Seiten. Wall-mount housing
Seite drucken
related literature | Search www.corning.com/opcomm. Click on "Resources."
0170_NAFTA_AEN Eclipse Hardware Product Family Specification Sheet
1.
Components
•
(1) ECL-W3P or (1) ECL-W6P housing
•
(12) Cable ties
•
(2) Strain-relief brackets
•
(4) 6-32 black screws
•
(2) Lock nuts
•
(1) Hardware kit:
•
(2) 6-32 screws
•
(2) M6 washers
•
(2) U-washers
•
(2) Nuts
2.
Tools and Equipment
In addition to the usual complement of installation tools, you will need 5/16-inch and 3/8-inch
nut drivers.
3.
Precautions
WARNING: Never look directly into the end of a fiber that may be carrying laser light. Laser light can
be invisible and can damage your eyes. Viewing it directly does not cause pain. The iris of the eye will not
close involuntarily as when viewing a bright light. Consequently, serious damage to the retina of the eye
is possible. Should accidental eye exposure to laser light be suspected, arrange for an eye examination
immediately.
STANDARD RECOMMENDED PROCEDURE 003-499 | ISSUE 4 | SEPTEMbER 2015 | PAGE 1 OF 5
Provider side
Fan-out
location
Fiber storage area
UCC
Eclipse
®
003-499, Issue 4
Connector panels
Customer side
Splice tray
•
(1) Cable clamp kit:
•
(1) Cable clamp
•
(2) 6-32 flat head screws
•
(1) 10-32 lock washer
•
(1) #10 washer
•
(2) Plastic bases
•
Sand paper
•
Shims (2 each of various sizes)
•
(1) Spacer for smaller diameter cables
Wall-Mount Housing
TPA-3010
Fiber
retaining
guides