Avanti FF18D1B Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für Kühlschrank Avanti FF18D1B herunter. Avanti FF18D1B 12 Seiten. Icemaker installation

Seite drucken
Tools Required:
Putty Knife
¼ inch Socket Wrench
Adjustable Wrench
Flat Screw Driver
1
Disconnect the unit from the electrical supply.
2
Remove ice tray rack from freezer.
3
Move the freezer shelf to the next position.
In order to remove the plug, you need to squeeze the two
4
ends and pull the plug out, or need to use the tools such as
a flat screw driver or needle nose pli
5
Carefully Remove the plugs / label from inside the freezer
compartment using a putty knife.
6
Peel away the label covering the ice-maker installation
hole.
7
Using a pair of needle nose pliers, remove the foam from
the hole.
8
Insert the water inlet tube into the small hole on the back of
the refrigerator. Rotate the hose while inserting until the
flat surface of the hose is secure against the back of the
refrigerator.
Pliers
Needle Nose Pliers or Nut Driver
Knife
er.
Plug