- ページ 2

冷蔵庫 Avanti FF18D1BのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Avanti FF18D1B 12 ページ。 Icemaker installation

Tools Required:

Putty Knife

¼ inch Socket Wrench

Adjustable Wrench

Flat Screw Driver

Disconnect the unit from the electrical supply.

Remove ice tray rack from freezer.

Move the freezer shelf to the next position.

In order to remove the plug, you need to squeeze the two

ends and pull the plug out, or need to use the tools such as

a flat screw driver or needle nose pli

Carefully Remove the plugs / label from inside the freezer

compartment using a putty knife.

Peel away the label covering the ice-maker installation

hole.

Using a pair of needle nose pliers, remove the foam from

the hole.

Insert the water inlet tube into the small hole on the back of

the refrigerator. Rotate the hose while inserting until the

flat surface of the hose is secure against the back of the

refrigerator.

Pliers

Needle Nose Pliers or Nut Driver

Knife

er.

Plug