Makita BJS161 Technische Informationen - Seite 7

Blättern Sie online oder laden Sie pdf Technische Informationen für Elektrowerkzeug Makita BJS161 herunter. Makita BJS161 9 Seiten. Cordless straight shears 1.6mm (16ga)
Auch für Makita BJS161: Gebrauchsanweisung (8 seiten), Gebrauchsanweisung (12 seiten)

Seite drucken

epair

[4] ADJUSTMENT

[4]-1. Side blades, Center blade

(1) Loosen M6x10 Hex socket set screw, as illustrated in Fig. 12.

Fig. 12

Loosen M6x10 Hex socket set screw

by turning with Hex wrench 3 approx.

360 degrees.

But, do not remove this screw.

(2) Adjust the gaps by inserting 1R366 into the gap A and B, and turning M4x25 Hex socket head bolt as illustrated

in Fig. 13.

Fig. 13

Gaps between Center blade and Side blades are defined depending on the thickness of the work piece.

Chose up two Thickness gauges from 1R366 for adjustment of the gaps referring to the following table.

Side blade L

Side

blade L

M4x25 Hex socket

head bolt

(on Side blade L side)

(3) After adjusting the gaps, tighten M6x10 Hex socket set screw with Hex wrench 3. Refer to Fig. 12.

Center blade

Side blade R

Side

blade R

Center blade

1R366

Thickness gauge

Thickness of

Required gap between

Work piece (mm)

A and B (mm)

less than 0.8

0.8 - less than 1.3

more than 1.3

Inserting the selected Thickness gauges into the gap A,

turn M4x25 Hex socket head bolt with Hex wrench 3

until the gap A can be adjusted to the required size.

In the same way, adjust the gap B. (almost same size to

Gap A)

Hex wrench 3

M6x10 Hex socket

set screw

(on Side blade R side)

Combination of

Thickness gauge

0.1

0.04 + 0.06

0.2

0.05 + 0.15

0.1 + 0.2

0.3

P 7/ 9