ALIBI ALI-NVR3104P Handbuch zur Schnelleinrichtung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Netzwerk-Hardware ALIBI ALI-NVR3104P herunter. ALIBI ALI-NVR3104P 12 Seiten.
Seite drucken- 1. Step 2. NVR Installation General Guidelines
- 2. Installing the System
- 3. Step 3. Install a Monitor, Mouse, Power
- 4. Step 4. Connecting It Together - Initial System Setup
- 5. Step 5. Using the Wizard for Basic Configuration Setup
- 6. Step 6. Access the Menu System
- 7. Specifications
- 8. HDD Installation
Switch to
symbols
Switch to
alphanumeric
Switch to
alphanumeric
Switch to
numeric
Installing the system
PART 3.
Step 1. Getting Started: Unpacking the Equipment
What's in the box
Your system includes:
NVR
•
6 foot Ethernet cable
•
6 foot HDMI cable
•
Power cable for NVR (ALI-NVR3108P), power adapter and cable (ALI-NVR3104P)
•
HDD SATA and power interface cables for internal hard disk drive(s)
•
Remove the equipment from its packaging and place it on a flat, clean surface. Inspect each item. If any visible damage is present, contact
your supplier for a replacement. Verify that your order is complete.
What you need
Although each security system installation is different, most require the following items not included with your system components:
VGA or HDMI compatible computer monitor
•
IP cameras and cables compatible with the NVR
•
Tools to install the cameras and route power and Ethernet cables
•
2
www.Observint.com
Backspace
Enter
Soft keyboard - numeric
Backspace
Enter
Soft keyboard - symbols
Fasteners to attach the cameras to the mounting surfaces
•
A display device to connect to the NVR. The NVR will connect directly to a VGA video monitor or an HDMI monitor (HDMI cable is
•
provided). The display device is usually needed only for system setup. It can be disconnected when the NVR is networked for access
across a LAN or Internet.
Uninterruptible power supply (UPS). This device is used to ensure system stability during voltage surges, sags, and outages. If a UPS is
•
not available, a power strip with strong surge protection is highly recommended.
Step 2. NVR installation general guidelines
Installing an HDD in the NVR
If you purchased your NVR without an internal HDD, you must install one for the NVR to function properly. Follow the procedure in "HDD
Installation - ALI-NVR3104P" on page 7 or "HDD Installation - ALI-NVR3108P - HDD 1" on page 9.
If you want to install a second HDD in an ALI-NVR3108P, refer to "HDD installation - ALI-NVR3108P - HDD 2" on page 11.
NVR Placement
Your monitoring and recording equipment is the core device for constant surveillance and the reliable capture of video evidence. Observint
Technologies strongly suggest that it be installed in a secure location with access limited to authorized personnel.
NVRs and monitors generate heat and should be placed in a clean and well ventilated area. A high temperature environment will reduce the
life span and reliability of the equipment. Additionally, the NVR is not weatherproof, so avoid exposure to liquids and excessive dust. Do not
place objects along the sides or behind the NVR that will block airflow through the unit.
Uninterruptible power supplies
It is strongly suggested that power to the system be routed through an uninterruptible power supply (UPS). These devices will keep your
security system running through most power outages, in addition to providing excellent surge and sag protection. The UPS should support
the NVR and all cameras to ensure normal operation during abnormal power conditions.
Proximity to other cameras and the local LAN
Your NVR connect to other devices through Ethernet networks. The NVR contains two network interfaces: one to a local area network (LAN)
through the LAN connector on the back panel, and the other directly to IP cameras plugged into the integrated Ethernet switch PoE ports.
USB
Internal Ethernet switch
Video Out
ports with PoE (8)
(HDMI, VGA)
The IP cameras you monitor with your NVR can be connected to either the Ethernet connectors on the back panel or the local LAN. However,
the number of cameras the NVR monitors on the LAN plus the number of those it monitors through the camera channel connectors on the
back panel cannot exceed the channel capacity of your NVR.
Audio IN/OUT
Power switch
LAN
Ground
Power cord
terminal
connector
© 2015 Observint Technologies, Inc. All rights reserved.
Fan outlet