ALIBI ALI-NVR3104P Handbuch zur Schnelleinrichtung - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Netzwerk-Hardware ALIBI ALI-NVR3104P herunter. ALIBI ALI-NVR3104P 12 Seiten.
Seite drucken- 1. Step 2. NVR Installation General Guidelines
- 2. Installing the System
- 3. Step 3. Install a Monitor, Mouse, Power
- 4. Step 4. Connecting It Together - Initial System Setup
- 5. Step 5. Using the Wizard for Basic Configuration Setup
- 6. Step 6. Access the Menu System
- 7. Specifications
- 8. HDD Installation
Specifications
PART 4.
Model
ALI-NVR3104P
Number of Channels Supported
Compression Format
Recording Performance
40 Mbps max
Remote Viewing Output Capacity
Supported Frame Rate per Channel
Recording Type
Supported IP Camera Resolution
Supported Playback Resolution
Synchronous Playback
4-ch @ 1080P
Video Output
1 channel (HDMI / VGA), resolution: 1920 × 1080P / 60 Hz, 1600 × 1200/60 Hz,
Video Output Formats
Two-Way Audio Input
Audio Output
Export Formats
1x Gigabit RJ-45 self-adaptive Ethernet interface,
Ethernet
4 independent 10 /100 Mbps PoE Ethernet interfaces
Max Power: 50 W
Power Over Ethernet
Supported Standards: 802.3af and 802.3at
USB
1x USB 2.0, 1x USB 3.0
Hard Drive Interface
Hard Drive Capatcity
1x HDDs, up to 6TB capacity
Alarm Input
Alarm Output
Operating System
Security
Protocols
IPv4, TCP/IP, UDP, HTTP, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, ONVIF, HTTP multipart
Power Requirements
Power Consumption
≤ 10W (without HDD)
Weight
2.2 lbs. (without HDD)
Dimensions (in.)
12.4" W × 9.1" D × 1.8" H
Operating Temperature
Color / Material
Material
Approvals
7
www.Observint.com
ALI-NVR3108P
4
8
H.264
80 Mbps max
80 Mbps max
Main stream: Up to 60 fps, Sub-stream: Up to 60 fps
Continuous, Schedule, Event, Motion Detection, VCA, POS
6MP / 5MP / 3MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
6MP / 5MP / 3MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
8-ch @ 720P, 6-ch @ 1080P
VGA, HDMI
1280 × 1024 / 60 Hz, 1280 × 720 / 60 Hz, 1024 × 768 / 60 Hz"
1-ch, RCA (2.0 Vp-p, 1 kΩ)
1-ch, RCA (Linear, 1 kΩ)
.MP4
1x Gigabit RJ-45 self-adaptive Ethernet interface,
8 independent 10 /100 Mbps PoE Ethernet interfaces
Max Power: 120 W
Supported Standards: 802.3af and 802.3at
1x USB 2.0, 1x USB 3.0
1x SATA
2x SATA
2x HDDs max, up to 6TB capacity each
Camera Dependent
Camera Dependent
Embedded Linux
Password Protection
48 Vdc
110-240 Vac @ 3.0 A
≤ 10 W (without HDD)
2.5 lbs. (without HDD)
17.4" W × 11.4" D × 1.8" H
14°F ~ 131°F
Black
Aluminum
CE, FCC, RoHS
Remote Client System Requirements
Operating System
Web Browser
Microsoft Internet Explorer 8.0, 9.0, 10, and 11 (32-bit version), Mozilla Firefox 13 and higher and 3.6, Safari 5 and higher
Software Requirements
Mobile Client OS Platform
Supplied Accessories
48Vdc Power Supply , 110 Vac Power Cord
HDD Installation
PART 5.
The following procedures illustrate hard disk drive (HDD) installation in NVR without an HDD, and installation of a second HDD. If you
purchased your NVR without a HDD, or you want to replace the HDD installed in your NVR, use this procedure as a guideline.
NVR compatible HDDs
For the best performance of your system, install only a high-reliability security grade HDD, such as Western Digital® Purple series or
GreenPower™ series HDD. Security grade HDDs are designed to stream video efficiently and have a very low failure rate.
The NVR can accommodate one HDD (ALI-NVR3104P) or two HDDs (ALI-NVR3108P), each with a capacity up to 6TB.
HDD Installation - ALI-NVR3104P
Cables and screws needed to install the HDD are provided.
Follow recommended electrostatic discharge (ESD) guidelines while performing this procedure. Install the HDD in a static-free
environment, wearing a certified ESD wrist strap. If a static free environment and ESD wrist strap is not available, touch the bare metal of
the DVR chassis frequently when installing the drive to dissipate the static charge naturally generated on your skin and clothing and avoid
CAUTION
touching electronic components.
1.
Power off the DVR, if necessary, then disconnect the power adapter and all other cables from the recorder.
2.
Remove the top cover from the DVR by removing the six cover screws. Two cover screws are located on each side, and two are located
on the back. See the drawing below. Save the screws for use later.
Microsoft Windows XP, Vista, 7, 8, 10 (32-bit and 64-bit version) / Linux 2.6+ /
Apple MacOS X 10.5 (Intel x86 only), 10.6 and 10.7
Web Component Installation
iOS, Android (Alibi Witness)
CD ROM (User's Guide, Installation Tools)
Quick Installation Guide
USB Mouse
Hard Drive Cables and Screws
110 Vac Power Cord
© 2015 Observint Technologies. All rights reserved.