Lexmark 2481 - Forms Printer B/W Dot-matrix Kurzreferenz - Seite 16
Blättern Sie online oder laden Sie pdf Kurzreferenz für Drucker Lexmark 2481 - Forms Printer B/W Dot-matrix herunter. Lexmark 2481 - Forms Printer B/W Dot-matrix 19 Seiten. Tech notes
Auch für Lexmark 2481 - Forms Printer B/W Dot-matrix: Tech Note (3 seiten)
Seite drucken
6
Open the operator panel cover to layer 2.
7
Press any paper movement button (LineFeed, Micro , Micro ) to align
the Top-Of-Form you want with the horizontal lines (located on the platen).
This illustration shows the position of the horizontal lines on either side of
the metal platen bar. Use these lines as your reference point when lining
up your Top-Of-Form. The bottom of a printed character will be even with
the horizontal lines.
Top view of printer
Horizontal
line
Paper
Operator
panel
8
Press Set TOF to set and save Top-Of-Form.
9
Close the operator panel cover.
10
To verify the new Top-Of-Form, press Load/Unload to unload the
continuous forms and press Load/Unload again to reload the forms.
The continuous forms load to the current Top-Of-Form setting.
11
Reinstall the ribbon access cover.
12
Press Start/Stop to set printer online.
Align paper with the
horizontal lines on
metal platen bar
Ribbon
cartridge
16
Platen
Front
cover