Lexmark 2481 - Forms Printer B/W Dot-matrix 빠른 참조 - 페이지 16
{카테고리_이름} Lexmark 2481 - Forms Printer B/W Dot-matrix에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 2481 - Forms Printer B/W Dot-matrix 19 페이지. Tech notes
Lexmark 2481 - Forms Printer B/W Dot-matrix에 대해서도 마찬가지입니다: 기술 노트 (3 페이지)
페이지 인쇄
6
Open the operator panel cover to layer 2.
7
Press any paper movement button (LineFeed, Micro , Micro ) to align
the Top-Of-Form you want with the horizontal lines (located on the platen).
This illustration shows the position of the horizontal lines on either side of
the metal platen bar. Use these lines as your reference point when lining
up your Top-Of-Form. The bottom of a printed character will be even with
the horizontal lines.
Top view of printer
Horizontal
line
Paper
Operator
panel
8
Press Set TOF to set and save Top-Of-Form.
9
Close the operator panel cover.
10
To verify the new Top-Of-Form, press Load/Unload to unload the
continuous forms and press Load/Unload again to reload the forms.
The continuous forms load to the current Top-Of-Form setting.
11
Reinstall the ribbon access cover.
12
Press Start/Stop to set printer online.
Align paper with the
horizontal lines on
metal platen bar
Ribbon
cartridge
16
Platen
Front
cover