Airgap Tap-a-tap AG250-503 Installationsverfahren - Seite 2
Blättern Sie online oder laden Sie pdf Installationsverfahren für Sanitärprodukt Airgap Tap-a-tap AG250-503 herunter. Airgap Tap-a-tap AG250-503 2 Seiten. Kitchen/restroom pedal with stainless steel finish
Seite drucken
1 – Pedal mount
1 – Top mounting plate
2 – #10x3/4 length mounting screws
2 – #10x1 length mounting screws
The AG250-503, in combination with the
AG250-003 valve, provides a hands-free
faucet operation. The valve is ordered
separately.
Please read the instructions once through before starting.
PEDAL INSTALLATION INSTRUCTIONS
1.
Place top mounting plate at the edge of the
cabinet and mark location of mounting
screws.Drill two holes for #10 screws.
(13/64-inch).
Drill hole 3/8-inch under the cabinet plate for
cable connection to the valve. (FIG.1)
Pass cable from the AG250-503 pedal through the
2.
3/8-inches opening under the cabinet plate and connect
it to AG250-003 valve installed inside the cabinet. (FIG.2)
AG250-503
Installation Procedures
LIST OF PARTS ENCLOSED
FIG. 2
-OVER-
Openings for
#10 screws
3/8" Diameter
FIG. 1
Use provided #10 screws (1-inch or
3.
3/4-inches) to attach the pedal. (FIG.3)
FIG.3
AG250-503
Pedal
AG250-003
Cold/Hot Potable Water
Electrical Valve