Airgap Tap-a-tap AG250-503 설치 절차 - 페이지 2

{카테고리_이름} Airgap Tap-a-tap AG250-503에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Airgap Tap-a-tap AG250-503 2 페이지. Kitchen/restroom pedal with stainless steel finish

페이지 인쇄

1 – Pedal mount

1 – Top mounting plate

2 – #10x3/4 length mounting screws

2 – #10x1 length mounting screws

The AG250-503, in combination with the

AG250-003 valve, provides a hands-free

faucet operation. The valve is ordered

separately.

Please read the instructions once through before starting.

PEDAL INSTALLATION INSTRUCTIONS

Place top mounting plate at the edge of the

cabinet and mark location of mounting

screws.Drill two holes for #10 screws.

(13/64-inch).

Drill hole 3/8-inch under the cabinet plate for

cable connection to the valve. (FIG.1)

Pass cable from the AG250-503 pedal through the

3/8-inches opening under the cabinet plate and connect

it to AG250-003 valve installed inside the cabinet. (FIG.2)

AG250-503

Installation Procedures

LIST OF PARTS ENCLOSED

FIG. 2

-OVER-

Openings for

#10 screws

3/8" Diameter

FIG. 1

Use provided #10 screws (1-inch or

3/4-inches) to attach the pedal. (FIG.3)

FIG.3

AG250-503

Pedal

AG250-003

Cold/Hot Potable Water

Electrical Valve