Avaya J100 Series Anweisungen verwenden - Seite 9

Blättern Sie online oder laden Sie pdf Anweisungen verwenden für IP-Telefon Avaya J100 Series herunter. Avaya J100 Series 18 Seiten. Expansion module h. 323

Avaya J100 Series Anweisungen verwenden
No.
Name
2, 4
Left and Right page
buttons
3
Active page LEDs

Avaya J100 Expansion Module icons

Avaya J100 Expansion Module uses the icons of the phone model it is attached to.
The icons are grayscaled and look identical on Avaya J100 Expansion Module attached to Avaya
J169/J179 IP Phones.
For more information about Avaya J100 Expansion Module icons, see the related section in the
user guide of your phone model.

Avaya J100 Expansion Module upgrade indication

Avaya J100 Expansion Module firmware upgrade process is indicated by displaying the Upgrade
notification on the expansion module.
Once the updated firmware has been downloaded, Avaya J100 Expansion Module displays the
following notification: "This device will be out of service for 3 minutes to
apply the update".
Press the corresponding line button for Apply now or Apply tonight option to select the suitable
upgrade time.
Note:
When the Upgrade notification is displayed, the expansion module screen saver is disabled
and the backlight is not turned off.
January 2019
Description
Line button LEDs indicate the following:
• The green light indicates that the line is in use.
• The red light indicates that the call appearance line is selected.
• The green and the red light combined indicate an ongoing call.
Buttons used to switch to a different active page.
Three LEDs indicating which active page is displayed.
Note:
The indication will change if only one Avaya J100 Expansion
Module if attached. If more expansion modules are attached,
the first LED is lit permanently.
Using Avaya J100 Expansion Module H.323
Comments on this document? [email protected]
Avaya J100 Expansion Module overview
9