Avaya J100 Series 지침 사용 - 페이지 9

{카테고리_이름} Avaya J100 Series에 대한 지침 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya J100 Series 18 페이지. Expansion module h. 323

No.

Name

2, 4

Left and Right page

buttons

Active page LEDs

Avaya J100 Expansion Module icons

Avaya J100 Expansion Module uses the icons of the phone model it is attached to.

The icons are grayscaled and look identical on Avaya J100 Expansion Module attached to Avaya

J169/J179 IP Phones.

For more information about Avaya J100 Expansion Module icons, see the related section in the

user guide of your phone model.

Avaya J100 Expansion Module firmware upgrade process is indicated by displaying the Upgrade

notification on the expansion module.

Once the updated firmware has been downloaded, Avaya J100 Expansion Module displays the

following notification: "This device will be out of service for 3 minutes to

apply the update".

Press the corresponding line button for Apply now or Apply tonight option to select the suitable

upgrade time.

Note:

When the Upgrade notification is displayed, the expansion module screen saver is disabled

and the backlight is not turned off.

January 2019

Description

Line button LEDs indicate the following:

• The green light indicates that the line is in use.

• The red light indicates that the call appearance line is selected.

• The green and the red light combined indicate an ongoing call.

Buttons used to switch to a different active page.

Three LEDs indicating which active page is displayed.

Note:

The indication will change if only one Avaya J100 Expansion

Module if attached. If more expansion modules are attached,

the first LED is lit permanently.

Using Avaya J100 Expansion Module H.323

Comments on this document? [email protected]

Avaya J100 Expansion Module overview