Avaya J100 Series 지침 사용 - 페이지 10

{카테고리_이름} Avaya J100 Series에 대한 지침 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya J100 Series 18 페이지. Expansion module h. 323

Avaya J100 Series 지침 사용

Chapter 3: Call operations

Making a call

About this task
Use this procedure to make a call using the expansion module lines. An outgoing call is indicated
with the outgoing call icon. The LED integrated in the line buttons are synchronized with the LED's
on the phone (the green LED combined with the red LED).
Procedure
1. Lift the handset and press the line button corresponding to the extension number to which
you want to call.
2. (Optional) Press the line button without lifting the handset to make a call using the
speakerphone.
If you are on a mute call, you can select an available call line appearance by using Up or
Down arrows.

Answering a call

About this task
Use this procedure to answer an incoming call using the expansion module line buttons. An
incoming call is indicated with the incoming call icon and the blinking green LED.
Procedure
Do one of the following:
• Press the flashing line button on Avaya J100 Expansion Module to activate the default audio
device and answer the call.
• Pick up the handset.
• Press Answer.
Note:
When the phone is locked, Avaya J100 Expansion Module lines will not be used. However,
you can answer an incoming call using the expansion module line buttons.
January 2019
Using Avaya J100 Expansion Module H.323
Comments on this document? [email protected]
10