Gardena TwinCut 8830 Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena TwinCut 8830 herunter. Gardena TwinCut 8830 11 Seiten. Cordless lawn trimmer

Seite drucken

5. Operating Your Cordless lawn trimmer

Cutting Grass :

When there is a sharp fall in the power of the cordless lawn trim-

mer, the battery needs to be charged. Do not wait until the blade

comes to an absolute stop.

If the charging socket flashes red during charging, a fault has

occurred (see 8. Troubleshooting).

DANGER !

There is a risk of injury if the switching devices

installed on the Shears are removed or bridged

(e.g. by fastening the on switch to the handle).

This prevents the cordless lawn trimmer switching

off automatically.

V Never remove or bridge the switching devices.

The starting lockout prevents your GARDENA

cordless lawn trimmer from being switched on

unintentionally.

Prepare the ground :

1. Clear the area to be cut of stones and other solid objects.

2. Remove the blade guard

Adjust the cordless lawn trimmer :

1. Press the pivot adjuster

the required angle.

Adjust the telescopic

swivel handle :

1. Undo the adjusting

nut

, adjust the

handle to the desired

length and tighten

the adjusting nut

again.

2. Undo the adjusting screw

adjust the handle to the

desired height and tighten

the adjusting screw

Turning on and off :

1. Disengage the starting lock

press the ON button

again.

2. To turn it off release the ON button

If the cordless lawn trimmer is used without the telescopic swi-

vel handle it can be switched on using the starting lockout

and the ON button

from the cutting blade.

and adjust the handle to

again.

by pushing it forwards and

Release the starting lockout

10a